Yueqing Aoda Electric & Electronic Factory
Main products:AVR,Speed Controller / Governor,Distribution Box,Engine Parts,Power Meter
Products
Contact Us
  • Contact Person : Ms. Zheng Anna
  • Company Name : Yueqing Aoda Electric & Electronic Factory
  • Tel : 0086-0577-62624536
  • Fax : 0086-0577-62624533
  • Address : Zhejiang,wenzhou,Siqian Tianyang industrial zone ,Xiangyang Town,Yueqing,Zhejiang,China
  • Country/Region : China
  • Zip : 325619

Rubber magnetic sheet,flexible magnet sheet

Rubber magnetic sheet,flexible magnet sheet
Product Detailed
1,With more than 10 years experiece of magnets area 2,Experienced Staff 3,Sophisticated equipment 4,Competitive price & services Rubber magnet sheet

Rubber magnet sheet  is produced with calendering process. It is normally used in office appliance, advertising, checking and testing meters etc. According to its magnetization method, it is divided into penetration magnetization and surface magnetization.(pole width 2,4,7mm or 12,7/6.4/3.6 poles per inch).

As with all magnetic materials ,performance is difficult to quantify without going into complex formula. We strive in this section to give rules of thumb and an appreciation of different materials which will help in the selection of magnets. Hands-on testing is definitely recommended(with papers/air gaps as necessary) to select the best magnet for the job.

Material Types of rubber magnet sheet

Material

Max. Energy Product

a.       Isotropic/semi Anisotropic Ferrite

0.7-0.8MGOe

b.       Full Anisotropic Ferrite( High Energy Sheet)

1.1-1.4MGOe

c.       Neodymium Flexible Material

2.0-2.5MGOe

 Material Thickness of rubber magnet sheet

The popular thickness range of flexible magnet material is 0.4-1.5mm, but thicker material is available in high energy. The thicker the material the greater the pull. It is not in direct proportion, but the thicker the material the greater the pull increase. Eg:0.75mm thick material has a pull of 44 gram/cm3 and if proportional the 1.5mm thick material would be 88gram/cm3, but in fact it is actually far higher at 140 gram/cm3.

Typical Pull Characteristics:

Material Thickness(mm)

Pull (Gram/cm3)

0.4

19

0.5

28

0.75

44

1.5

140

Rubber magnetic sheet,flexible magnet sheet



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.